Egis Company Engineering and Infrastructure Jobs in the UAE 2026 – Bridge Maintenance, Rail CAD, Heavy Driving and Electrical Engineering
A group of engineering and infrastructure opportunities is available in the United Arab Emirates across bridge maintenance, rail and road CAD production, heavy-vehicle driving, and site-based electrical engineering.
The listed positions are Scaffolder – Bridge Maintenance, CAD Lead – Rail, Driver – Heavy Duty (Bus & Trailer), and Graduate Electrical Engineer – UAE National, Site Based.
The supplied material contains an employer-name inconsistency. The Scaffolder vacancy explicitly identifies Waagner Biro Bridge Services, while the supplied article URL contains “egis-company.” The remaining three vacancy descriptions do not state an employer name directly. This article therefore avoids assigning an unconfirmed employer to those roles.
Employer Information
Waagner Biro Bridge Services is explicitly named in the Scaffolder vacancy. The company is described as a construction and engineering organisation with more than 50 years of activity in Dubai and the UAE.
The supplied profile states that the company serves government and private-sector clients and provides end-to-end services covering design, construction, and maintenance.
Its multidisciplinary engineering capabilities are described as including civil, mechanical, structural, and electrical engineering.
The employer for the CAD Lead – Rail, Driver – Heavy Duty, and Graduate Electrical Engineer positions is not stated in the supplied vacancy text. Candidates should verify the legal employer on the official application page before submitting personal documents.
Available Jobs
- Scaffolder – Bridge Maintenance
- CAD Lead – Rail
- Driver – Heavy Duty (Bus & Trailer)
- Graduate Electrical Engineer – UAE National, Site Based
Application, CV, Portfolio and Interview Preparation Tips
Vacancy Summary
- Number of listed positions: Four.
- Country: United Arab Emirates.
- Confirmed employer for the Scaffolder role: Waagner Biro Bridge Services.
- Employer for the other positions: Not confirmed in the supplied vacancy text.
- Career areas: Scaffolding, bridge maintenance, rail CAD, transportation design, heavy-duty driving, and electrical engineering.
- Application deadline: Not specified.
- Application method: Not specified in the supplied material.
Important Source Clarifications
The Scaffolder title appears twice in the supplied material: once with the job description and once with the qualifications. These sections have been combined into one complete vacancy page.
The Graduate Electrical Engineer title states that the role is site based and limited to UAE nationals. The UAE National Family Book is also explicitly required.
The Driver vacancy requires a current UAE driving licence in categories 4 and 6, in addition to a commercial driving licence with a heavy-vehicle endorsement.
Information Not Specified Across the Announcement
Unless clearly stated for a specific position, the supplied material does not confirm:
- Exact UAE work city.
- Employment type.
- Working days.
- Working hours.
- Shift arrangements.
- Number of vacancies.
- Contract duration.
- Probation period.
- Joining date.
- Salary.
- Allowances.
- Employee benefits.
- Application deadline.
- Official application instructions.
Applicants should verify the employer, location, employment terms, and official application channel before applying.
↚
Scaffolder – Bridge Maintenance
About Waagner Biro Bridge Services
Waagner Biro Bridge Services is described as a long-established construction and engineering company serving government and private-sector clients in Dubai and across the UAE.
The supplied profile states that the company provides services from design and construction through maintenance and is supported by civil, mechanical, structural, and electrical engineers.
Role Overview
The Scaffolder will support bridge-maintenance projects by erecting, modifying, and dismantling scaffolding structures.
The scaffolding will provide safe access for inspection, repair, maintenance, and rehabilitation activities on bridges and related infrastructure.
Scaffold Erection
The role includes assembling scaffolding systems according to approved requirements and safe working practices.
Candidates should understand stable foundations, structural support, access, platforms, guardrails, ties, bracing, load limits, and safe assembly sequences where applicable.
Scaffold Modification
Scaffolding may need to be modified as bridge-maintenance activity progresses.
Any modification should maintain structural stability, safe access, and compliance with approved procedures.
Scaffold Dismantling
The Scaffolder will dismantle structures safely after work is completed or when access requirements change.
Dismantling should follow a controlled sequence and prevent falling materials, instability, or unsafe access.
Bridge Inspection Access
Scaffolding will support access for bridge inspections.
The source does not identify bridge types, access methods, inspection disciplines, or traffic-management arrangements.
Bridge Repair and Rehabilitation
The role supports repair and rehabilitation works on bridges and related infrastructure.
Candidates should be comfortable working around active construction, maintenance equipment, restricted spaces, moving traffic, and changing site conditions where relevant.
Working at Height
Applicants must be able to work safely at height.
This requires discipline, correct use of protective equipment, awareness of fall hazards, and compliance with access and rescue procedures.
Outdoor Working Conditions
The role requires work in outdoor conditions.
Candidates should be physically prepared for weather exposure, bridge environments, noise, dust, and demanding site conditions.
Physical Requirements
Applicants should be physically fit and capable of handling heavy scaffolding materials.
The source does not provide medical, lifting, or fitness-test criteria.
Required Experience
Three to five years of scaffolding experience in construction or infrastructure projects is required.
Preferred Project Experience
Experience in bridge maintenance or highway projects is preferred.
This is a preference rather than an explicitly mandatory condition.
Scaffolding Knowledge
Applicants should have basic knowledge of scaffold erection, modification, dismantling, and safety practices.
Preferred Certifications
CISRS, OSHA, or an equivalent scaffolding certification is preferred.
The source does not identify the required certification level or jurisdiction.
Safety Responsibilities
The role should be performed in accordance with site safety procedures and approved scaffolding practices.
Candidates should be prepared to discuss inspections, tagging, access control, fall protection, material handling, weather conditions, and communication with supervisors.
Information Not Specified
- Exact UAE work location.
- Employment type.
- Shift schedule.
- Working hours.
- Team size.
- Required certification level.
- Salary and benefits.
- Application deadline.
CV Preparation Guidance
- Use the exact title “Scaffolder – Bridge Maintenance.”
- Show three to five years of relevant experience clearly.
- Highlight bridge, highway, civil, or infrastructure projects.
- Describe erection, modification, and dismantling work.
- Include working-at-height experience.
- List CISRS, OSHA, or equivalent certifications accurately.
- Describe scaffold inspections or tagging where relevant.
- Include strong safety-performance examples.
- Do not claim certifications that have expired or were not completed.
Interview Preparation
- Explain how you prepare an area before scaffold erection.
- Describe the checks required before use.
- Prepare an example of modifying a scaffold safely.
- Explain how you work around bridge or highway traffic.
- Discuss fall-protection practices.
- Describe how you respond to unsafe scaffold conditions.
↚
CAD Lead – Rail
Role Overview
The CAD Lead – Rail will prepare and manage detailed two-dimensional and three-dimensional drawings for rail, road, civil, structural, and transportation-infrastructure projects.
The role requires strong Bentley MicroStation capability, disciplined drawing control, CAD-standard implementation, and support for BIM processes where applicable.
2D and 3D Drawing Preparation
The CAD Lead will prepare detailed 2D and 3D project drawings.
Drawings should be technically accurate, coordinated, clearly presented, and suitable for project review and delivery.
Track Layouts
The role includes preparation of rail track-layout drawings.
The source does not identify the rail system, track type, design stage, or governing standard.
Alignment Plans
The CAD Lead will prepare rail-alignment plans showing the horizontal route and associated transportation information.
Cross-Sections
Cross-sections will be prepared for rail and road projects.
These drawings may show levels, earthworks, track or road formation, drainage, structures, clearances, and interfaces where required.
Longitudinal Profiles
The role includes preparation of longitudinal profiles showing vertical alignment and project levels.
Roadway Plans and Typical Sections
The CAD Lead will also prepare roadway plans and typical road sections.
Civil and Structural Layouts
Civil and structural layouts related to transportation projects form part of the drawing workload.
Project Standards and Codes
Drawings should comply with project standards, applicable codes, and client requirements.
The source does not identify specific rail, road, civil, or structural standards.
Drawing Templates
The CAD Lead will create and maintain drawing templates to improve consistency and efficiency.
Title Blocks
The role includes maintaining project title blocks and ensuring that drawing information is current and controlled.
CAD Libraries
CAD libraries should be created and maintained to support efficient and standardised workflows.
Bentley MicroStation V8i
The position requires use of Bentley MicroStation V8i.
MicroStation CONNECT Edition
Experience with MicroStation CONNECT Edition is also required.
Reference Files
The CAD Lead will manage reference files to support coordinated project models and drawings.
Levels and Sheet Models
The role includes managing levels and sheet models while maintaining model integrity.
CAD Standards
The CAD Lead will implement CAD standards and workflows across the drawing process.
Layer Management and Symbology
The role includes management of layers or levels, symbology, line styles, colours, weights, and drawing conventions.
Annotation Styles
Annotation styles should remain consistent with project requirements and drawing standards.
BIM Support
The CAD Lead will support BIM-process integration where applicable.
The source does not identify a BIM platform, common-data environment, level of development, or coordination standard.
Leadership Scope
The title includes “Lead,” but the supplied material does not provide a detailed team-management or supervisory responsibility list.
Information Not Specified
- Academic qualification.
- Minimum years of experience.
- Required team-leadership experience.
- AutoCAD requirements.
- Specific BIM software.
- Exact UAE work city.
- Employment type.
- Salary and benefits.
- Application deadline.
CV and Portfolio Guidance
- Use the exact title “CAD Lead – Rail.”
- Highlight MicroStation V8i and CONNECT Edition.
- Show track layouts and alignment plans.
- Include cross-sections and longitudinal profiles.
- Describe road, civil, and structural drawing experience.
- Show CAD-standard and library management.
- Include reference-file, level, and sheet-model experience.
- Describe BIM support where applicable.
- Remove confidential project and client information from samples.
Interview Preparation
- Prepare a rail-drawing package example.
- Explain how you manage reference files.
- Describe your level and sheet-model workflow.
- Explain how you enforce CAD standards.
- Prepare an example of resolving a drawing-coordination issue.
- Discuss MicroStation V8i and CONNECT Edition differences you have encountered.
↚
Driver – Heavy Duty (Bus & Trailer)
Role Overview
The Heavy-Duty Driver will operate buses, trailers, or other large commercial vehicles in accordance with UAE licensing, traffic, safety, and vehicle-maintenance requirements.
Required Driving Licences
- Valid commercial driving licence.
- Heavy-vehicle endorsement.
- Current UAE driving licence.
- UAE licence category 4.
- UAE licence category 6.
Required Experience
Applicants should have at least five years of proven professional experience driving large or heavy-duty vehicles.
Bus and Trailer Operation
The title identifies both bus and trailer driving.
The source does not state whether the employee will drive passengers, cargo, project equipment, or a combination of vehicle types.
Clean Driving Record
Applicants should have a clean driving history with no major traffic violations or accidents.
Vehicle Inspections
The Driver should be capable of conducting routine vehicle inspections.
Inspection areas may include tyres, lights, brakes, mirrors, fluid levels, safety equipment, and visible defects.
Vehicle-Maintenance Knowledge
Comprehensive knowledge of vehicle-maintenance procedures is required.
The source does not state that the Driver will perform advanced mechanical repairs.
Safety Regulations
Applicants should understand heavy-vehicle safety regulations and safe operating practices.
UAE Traffic Laws
Strong familiarity with UAE traffic laws and country-specific driving requirements is required.
Pre-Trip and Post-Trip Checks
Although not separately stated, routine inspections commonly include checks before and after vehicle operation.
Candidates should describe only the inspection procedures they have actually performed.
Incident Reporting
The supplied material does not describe incident, breakdown, or accident-reporting procedures.
Information Not Specified
- Exact UAE work city.
- Route type.
- Passenger or cargo responsibilities.
- Shift schedule.
- Working hours.
- Uniform or equipment requirements.
- Salary and allowances.
- Accommodation or transport benefits.
- Application deadline.
CV Preparation Guidance
- Use the exact title “Driver – Heavy Duty (Bus & Trailer).”
- List UAE licence categories 4 and 6 clearly.
- State commercial and heavy-vehicle endorsements accurately.
- Show at least five years of relevant experience.
- Describe bus, trailer, or heavy-vehicle types driven.
- Highlight a clean driving and safety record.
- Include routine inspection and basic maintenance knowledge.
- Do not provide licence or identification numbers publicly in the CV.
Interview Preparation
- Prepare examples of heavy-vehicle routes and conditions.
- Explain your daily inspection process.
- Describe how you respond to a vehicle defect.
- Discuss UAE heavy-vehicle rules.
- Prepare an example of avoiding an accident or hazard.
- Explain how you manage fatigue and safe stopping distances.
↚
Graduate Electrical Engineer – UAE National, Site Based
Role Overview
The Graduate Electrical Engineer opportunity is a site-based early-career position for UAE nationals.
The role requires an accredited Electrical Engineering degree, a UAE National Family Book, technical understanding, design-software familiarity, safety awareness, and analytical capability.
UAE-National Eligibility
Applicants must be UAE nationals and hold a UAE National Family Book.
Required Education
A bachelor’s degree in Electrical Engineering from an accredited university is required.
Graduate-Level Position
The title identifies the role as a graduate opportunity.
The source does not specify prior work-experience requirements, graduation year, or GPA.
Site-Based Work
The role is explicitly site based.
Candidates should be prepared for practical project conditions, coordination with site teams, inspections, technical documentation, and compliance with safety requirements.
Electrical-Engineering Principles
Applicants should have a strong understanding of electrical-engineering principles and practices.
AutoCAD
Familiarity with AutoCAD is required.
Candidates may be expected to read, review, or assist with electrical drawings and layouts.
ETAP
Familiarity with ETAP is also required.
The source does not identify the required analysis modules or project applications.
Electrical Codes
Applicants should understand applicable electrical codes.
The source does not identify specific UAE or international codes.
Electrical-Safety Standards
Knowledge of electrical-safety standards is required.
Candidates should understand hazards such as live equipment, isolation, grounding, arc flash, testing, and safe work controls at an appropriate graduate level.
Project-Management Skills
Basic project-management skills are required.
This may include task planning, progress tracking, documentation, communication, priorities, and issue follow-up.
Microsoft Office
Proficiency in Microsoft Office is required.
Analytical Ability
The graduate should be able to evaluate technical information, calculations, drawings, test results, and site conditions logically.
Problem-Solving Ability
Strong problem-solving capability is required.
Candidates should prepare examples from university projects, laboratories, internships, or technical assignments.
Information Not Specified
- Exact site location.
- Graduation-year requirement.
- GPA requirement.
- Internship requirement.
- Professional registration.
- Employment type.
- Working hours.
- Salary and benefits.
- Application deadline.
CV Preparation Guidance
- Use the exact vacancy title.
- State UAE nationality and Family Book eligibility accurately.
- List the accredited Electrical Engineering degree.
- Include university projects and laboratories.
- Highlight AutoCAD and ETAP familiarity.
- Describe electrical-code and safety knowledge.
- Include internships or site exposure where available.
- Highlight analytical and problem-solving achievements.
- Do not place Family Book or national-identification numbers in a public CV.
Interview Preparation
- Review core electrical-engineering principles.
- Prepare a university-project example.
- Explain how you used AutoCAD or ETAP.
- Review electrical safety and isolation concepts.
- Prepare a technical problem you solved.
- Explain why you are interested in site-based work.
↚
Application, CV, Portfolio and Interview Preparation Tips
Before Applying
- Open the official vacancy page.
- Confirm the legal employer for the selected role.
- Verify the exact UAE work location.
- Check that the vacancy remains active.
- Review the complete responsibilities and qualifications.
- Confirm employment type, working hours, and benefits.
- Prepare a role-specific CV.
- Keep a copy of the submitted application.
Scaffolder CV Tips
- Show three to five years of scaffolding experience.
- Highlight bridge or highway projects.
- Describe erection, modification, and dismantling.
- List working-at-height and safety training.
- Include CISRS, OSHA, or equivalent certification.
Rail CAD Portfolio Tips
- Include rail and road drawing samples where permitted.
- Show track layouts, alignments, sections, and profiles.
- Explain your exact contribution.
- Identify MicroStation versions used.
- Remove confidential project and client information.
Heavy-Duty Driver CV Tips
- List valid licence categories accurately.
- Show five years or more of heavy-vehicle experience.
- Describe vehicle types driven.
- Highlight inspection and maintenance knowledge.
- State a clean safety record accurately.
Graduate Electrical Engineer CV Tips
- State the Electrical Engineering degree.
- Include academic projects and technical laboratories.
- Highlight AutoCAD and ETAP.
- Describe electrical-safety knowledge.
- Include internships and site exposure where available.
Recruitment Safety
- Verify the employer before sending documents.
- Use only official recruitment channels.
- Do not share passwords or one-time verification codes.
- Do not send banking information during the initial application.
- Do not pay money in exchange for an interview or job offer.
- Do not send original identity documents.
- Verify the worksite and interview location before attending.
- Review the written employment offer carefully.
Frequently Asked Questions
How many jobs are listed?
Four distinct positions are included.
Which company is hiring the Scaffolder?
The Scaffolder vacancy explicitly identifies Waagner Biro Bridge Services.
Are the other positions confirmed as Waagner Biro or Egis jobs?
No. The supplied descriptions do not directly identify the employer for the CAD Lead, Driver, or Graduate Electrical Engineer roles.
How much experience is required for the Scaffolder?
Three to five years of scaffolding experience in construction or infrastructure projects is required.
Is bridge-maintenance experience mandatory?
It is preferred rather than explicitly mandatory.
Which CAD software is required?
Bentley MicroStation V8i and MicroStation CONNECT Edition are explicitly mentioned.
Which driving-licence categories are required?
The Driver vacancy requires current UAE categories 4 and 6, together with a commercial licence and heavy-vehicle endorsement.
How much driving experience is required?
A minimum of five years of professional heavy-vehicle driving experience is required.
Who can apply for the Graduate Electrical Engineer role?
The role is for UAE nationals who hold a UAE National Family Book and an accredited bachelor’s degree in Electrical Engineering.
Which electrical-design tools are mentioned?
AutoCAD and ETAP are explicitly referenced.
Are salaries and benefits stated?
No salary, allowance, or employee-benefit information is included.
Is an application deadline provided?
No application deadline is stated.
How should candidates apply?
Candidates should use the official vacancy page, verify the legal employer, and follow the confirmed application instructions shown for the selected role.
Project Quantity Surveyor
Graduate Project Coordinator (UAE National)
Senior Architect Of Record
Estimator - Infrastructure
QA/QC Engineer
Foreman - Civil (Bridge Maintenance)
Mechanical Technician - Nuclear
Scaffolder (Bridge Maintenance)
Deputy Programme Manager / Workstream Coordinator
Lead Quantity Surveyor
Helper
Graduate Civil Engineer - UAE National
Site Engineer (Marine)
Senior Rail Track & Alignment Design Engineer
Quantity Surveyor (Pre-Contract)
QA/QC Material Engineer
Stakeholder Engineer (UAE National)
Project Coordinator - UAE National
Scaffolding Team Leader (Bridge Maintenance)
Contracts / Commercial Manager
MEP Design Manager – Data Centres
Applications Lead – EDL, Siglon, PQA, Settlement & In-House OT
Senior Business / Financial Analyst – OT Programmes
Structural Inspector - Site
BIM Manager - Digital Delivery
Senior Project Manager - Ports and Marine
Junior Quantity Surveyor
Senior Structural Engineer (Bridge Maintenance)
Senior Planning Engineer (Bridge Construction Project)
Stakeholder Engineer - NOC Coordinator
Senior Quantity Surveyor (Pre-Contract)
Estimator - Marine
Mechanical Engineer
Assistant Storekeeper
Quantity Surveyor
Assistant Quantity Surveyor
Driver - Heavy Vehicle (Water Tanker)
Project Quantity Surveyor - Infrastructure Maintenance
Safety Assurance & RAMS Manager
Lifting Supervisor (LEEA Appointed Person)
Driver - Heavy Duty
Foreman - Facade Installation
Electrician
Site Supervisor / Commissioning Engineer (Power, Water, OT)
Junior Architect-Modeler (UAE National Only)
Senior Telecom / Network Architect – Utility OT
Project Controls / Planning Engineer
Electrical Inspector - Site
Control Room / Human Factors & Interior Design Specialist
BIM Engineer - Structures
Principal Engineer - Roads and Highways
SCADA / EMS Solution Architect
Project Coordinator (UAE National)
Technical Manager - Rail Systems
Graduate Electrical Engineer - MEP (UAE National)
Electrical Engineer
Structural Inspector - Site
Graduate Engineer - Electrical (UAE National)
Senior RFP / Contracts Specialist (Technical)
OT Infrastructure / Data Centre Architect
Bending Machine Operator
Field Systems Engineer – SCMS / RTU / WAMS / PQA
MEP Technical Director – Data Centres
HVAC Technician
Planning Engineer
Mason
Technical Lead – Control Centre OT
Lead Supervisor for FAT, SAT, Site Installation, Commissioning
Project Manager - Marine
OT Cybersecurity Specialist
Operation Manager - Infrastructure Maintenance
Technical Lead – OT & Telecom (TQT)